United Bimmer Do-It-Yourself Disclaimer: The following tutorial is meant as a guide and is not guaranteed to be complete or 100% accurate.  By following this DIY, you understand any work done on your car is at your own risk and we hold no responsibility if you break something.  If you feel uneasy with this risk, we recommend you take your car to a professional mechanic to have the work done.  Otherwise, enjoy yourself and good luck!

In the winter times when the temperature hits in the 30's sometimes your DDE will take a good while to get to the good temperature to get on. A fix for that is to hard wire the ballast in...

The ballast is located between the high beams and the low beams, it's a small black box...



GENTLY take it out



Then find the two connectors...



Cut the cables ONE AT A TIME!!!! then hard wire them, and you're done