List Of Mods You Want To Do In The Future.

[Speedinfusion]

1 - Subframe reenforcement front and rear - 100/700
2 - 95 M3 Crankshaft - 400/???
3 - Eurospec Intake Cam - 240/???
4 - UUC Transmission enforcers and mounts - ???/120
5 - Sway Bars - ???/???
6 - X-Brace - 100/free diy
7 - Stainless Stell Brake lines - 80/???
8 - Lightweight Flywheel + m5 Clutch - 800/500
9 - Lightweight Rims - ????/ Free diy
10 - Bumpers + Skirts + Paintjob - 800/1500
11 - Big Brake Kit - 1200/120
12 - Alluminum Radiator - 400/100
13 - Turbo - 4000/????

[jybute]

Turbo? You dont like n/a. Turbo is like cheating man.

[komodo]

Pending Stuff:
- M3 Front Bumper + diffuser (on order)
- LCD Sun Visors (on order)
- S52 Cam Shafts (just arrived)
- 5-speed conversion (in talks now)
- ACS Pedals (still need to install)
- Umnitza DDE Remote On (need to install)
- O2 Simulators (ordering in the next day or two)

Future Stuff:
- Silver rings around gauges
- M3 Rear Diffuser
- M3 Side Moldings
- CF Hood
- Fluidyne aluminum radiator
- Short Shifter
- Lightweight FW
- UUC Tranny reinforcers
- Viper Alarm System
- F&R Sway Bars (UUC Sway Barbarian)
- SS Brake Lines
- Rims (ACS Type 3 replicas)
- Low Profile Tires
- Run 802.11g antenna along trunk roof liner
- Dinan suspension
- Dinan Fuel Rail Cover (I don't have one now, and that'd get me the badge)
- CF Hood
- UUC CF Spoiler
- Brushed aluminum interior pieces
- Black dyed headliner (like Robstah's car)
- Umnitza Xenon upgrade
- HID crystal foglight upgrade
- New crystal corners
- Mount V1 in rear brake light and run cable to computer for digital display
- OCX Racing Exhaust headers
- Paint car jet black metalic or dakar yellow (if black, replace angel eye rings with red)
- Transporter style keypad ignition
- Upgrade sound system to higher rms subs
- XM Radio Module for the AVIC-N2 with subscription
- Custom fiberglassed trunk for sound system and computer
- Custom forged internals to handle high boost turbo
- Turbonetics manifold w/T3 flange and external wastegate provision
- T3/T4 60-1 Turbo w/ .82A/R(hot side) and .70 A/R(cold side) w/T04S housing and stage III wheel
- Tial 38mm w/.4 Bar spring wastegate
- Combination of 2.5" and 3" piping to Intercooler
- Full 3" piping from intercooler to HFM w/Samco hoses
- EMC's 24x12x3 bar/plate Intercooler
- HKS Super Sequential BOV or GReddy Type RS BOV
- Technique Tuning HFM
- Custom TT or AA software
- Bosch 42lb. injectors
- Clutchmasters stage II clutch
- GReddy Profec Type S boost controller
- Defi Boost Gauge
- Innovative Wideband LM-1 02 Sensor
- VAC motorsports .120 head gasket to drop compression to 9.5:1
- 4.10 lsd differential
- Replace front seats with massaging seats
- LCD view screens in driver and passenger headrests
- Vehicle Dynamics module for AVIC-N2
- Tap car computer into OBD2 connection for realtime stats
- Bluetooth module for cell phone integration
- Xbox tied to video 2 on the lcds with wireless controllers in cabin

And then I think I'd be done with my car.

I've already knocked out quite a few items on my original list. Current: http://komodo.penguinstudios.com

[c1apton]

Just one -the new tolerence for shitty drivers option

[RogueRonin]

JESUS, HARRY!! You're car's like a damn space ship. LCD Sun Visors!? Can I get an explanation on that, please? For cryin' out loud kid.

[komodo]

Originally Posted by RogueRonin

JESUS, HARRY!! You're car's like a damn space ship. LCD Sun Visors!? Can I get an explanation on that, please? For cryin' out loud kid.

http://www.unitedbimmer.com/forums/s...1957#post61951

[DEATH2000]

holy shit harry, that list of future stuff u wanna do would take up and enitre sheet of paper if u were to print that off. man i say after u complete that list go get an M3

[94bmw325i]

Suspension
New exhaust
New bumper
Maybe turbo/ s50 motor....
M3 cams
5 speed

[bex325]

For the Cabby:
repaint and late model bumper and valence swap -- coming spring 06
5 speed swap & 3.73 LSD-- sometime in 06
suspension
Mark D 91 octane chip -- soon
butt brace & front strut bar
Style 10 15x 7.5" wheels with gunmetal centers and polished lips -- very soon, wheels are at the shop getting fixed as we speak


down the road

5- lug suspension swap
s50 swap

For the Coupe:

front suspension rebuild -- now, it needs it to be insured

after the cabby is finished i'll convert it to a track rat

respray and euro bumper swap
completely stripped interior
m20 stroker
roll cage
ground control suspension


and then buy either a 325ix or an old volvo for a winter beater/ice racer

[bmw4life]

I would kinda like to save up some money and sell my car and get a m3 but if not
m3 bumpers, skirts, mirrors, uuc spoiler, intake, chip, sound system, 5 spd swap if the auto goes bad, then suspension and more motor stuff

[SHAHAB323IS]

like i said on werkz

1. e30, e36, e46 m3 10-55k

[catalyst]

Realistic mods:

-3.15 LSD... hopefully by the summer
-Koni adjustable shocks
-H&R race springs
-S50 cams
-Aluminum control arms
-Adjustable rear control arms
-Big sway bars
-All urethane bushings, front and rear suspension
-subframe reinforcement
-Reinforced transmission mounts
-SSK
-Race seats, or manual M3 Vaders
-E36 M3 front brakes, or e46 330.
-SS lines
-Deleted Cats
-Magnaflow muffler or IE stainless catback
-m52/s52 headers

Far off in the future mods:

-Custom aluminum 2.8L
-s52 crank, rods, and suitable pistons
-s52 head
-5 speed ZF transmission, or 6 speed evo if money allows

[Spieluhr]

Ready:
-Kamei eyelids (in the mail)
-M3 Rear diffuser (needs to be sanded and painted)

Future (In order):
-Borla Exhaust
-Koni Shocks w/ H&R sport springs
-Understeer installation kit
-M50 Intake Manifold
-Conforti Shark Software
-Cold Air Intake
-M3 Mirrors
-5-speed conversion
-SSK
-MB Quart 5.25" component speakers
-Pioneer N2 In-dash LCD

That's all I can come up with now.
-

[nick_318is]

Here is my list:
Dinan Exhaust (would get me a badge) - hopefully this summer
ATE Powergrove Front Rotors
Bigger Sway Bars
Lightweight Flywheel
Short Shift Kit
CAI if I can find a decent one (suggestions for an e30 with an m42?)
Harnesses for the track/auto X
New Windsheild
Upgraded Headlights
Repaint (paint is still original and looks good but could look better)

Way in the future:
Another e30 318is in decent condition to Gut, Put a cage in, racing seats, Clutch, Short shift, awsome suspension, as many goodies as I can find for it, followed by a different differential to make it scream (I know a guy who knows a guy that could build me a sweet one), I would of coarse think about getting into BMW club racing with it and definitly use it for drivers schools

[Longhairedhippy]

Since I'll be getting an e36 M3 in the next 12 months, i thought i'd list the mods I have planned for that (note that I plan to keep that car forever and the mods are planned as such.)

Body:
Eisenhaus/Flossman GTR widebody
ViS CF hood
Hamann scissor door kit

Performance:
Active Autowerke Supercharger
Shrick cams
Dinan Stage 2 engine software
lightweight pistons and crank
Eisenmann exhaust
Eurospec engine swap
sequential BOV
ZEX dryshot nitrous
TMS underdrive pulleys

Drivetrain:
6-speed transmission swap
Sachs clutch
lightweight flywheel
carbon fiber driveshaft
short-shift kit
Limited slip differential

Suspension:
Bilstein PSS9 coilovers
AC schnitzer front strut brace
Racing Dynamics swaybars
TMS camber kit
rear camber correction arms

Exterior:
Umnitza 800k Xenons
Clear LED lights all around
Hella driving lights (fog replacement)
Carbon Fiber eyebrows
20% tint

Interior:
Carbon interior trim pack
Vaders
Sparco 6-point harness
Momo shift knob
Momo steering wheel
TMS steering wheel quick release
AC schnitzer e-brake handle
xenon matching cabin lights
VDO gauge pack
Aluminum gauge face

Brakes:
Brembo GT Big Brake Kit
stainless brake lines
carbon fiber brake ducts

Wheels:
19" BBS RS-GT
Goodyear Eagle F1 tires

Accessories:
Full Alpine Audio system
Alarm
G-tec 2 performance meter
hardwired V1 rader detector
integrated GPS nav
Dinan CF engine cover