United Bimmer Community - BMW Forum

United Bimmer Community - BMW Forum (http://www.unitedbimmer.com/forums/index.php)
-   5-Series (http://www.unitedbimmer.com/forums/forumdisplay.php?f=50)
-   -   Power steeringwheel position adjustment (http://www.unitedbimmer.com/forums/showthread.php?t=75402)

mjd420nova 03-21-2013 01:53 PM

Power steeringwheel position adjustment
 
1995 525i
I've checked all the fuzes and the fault's not there. I can not move the wheel in or out and is stuck in the full in position. Can this be moved manually?

DEATH2000 03-23-2013 06:13 PM

Their should be a lever underneath the wheel that releases the wheel enabling it to tilt. At least on my E36 anyway.

mjd420nova 03-27-2013 02:52 PM

This is the power adjustment for the telescopic steering wheel. No tilt, just in and out. The control is a shorter stick below the turn sig/hi/lo beam stick.

DEATH2000 03-31-2013 10:09 AM

If you have a multi meter i would remove the portion covering the bottom of the wheel and test for power.

mjd420nova 03-31-2013 10:47 PM

I'm getting a clicking noise (relay) behind the housing cover on an "extend" action with the switch but nothing on withdraw. If there's a mechanism behind the cover, can it be moved mechanically by advancing the motor by hand. I just need to extend the wheel two inches so the wife can drive it.

DEATH2000 04-11-2013 07:31 PM

Ive never heard of anyone actually mechanically moving it. I would test that relay though, and if its bad then replacing it should solve the problem.


All times are GMT -5. The time now is 07:25 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright © 2005-2013 UnitedBimmer.com