ANGEL EYES cold start fix by ROOZ
In the winter times when the temperature hits in the 30's sometimes your DDE will take a good while to get to the good temperature to get on. A fix for that is to hard wire the ballast in...
The ballast is located between the high beams and the low beams, it's a small black box...
GENTLY take it out
Then find the two connectors...
Cut the cables ONE AT A TIME!!!! then hard wire them, and you'r done :D
special thanks to ROOZ for this great write up:worship
:rock Yeahhhh :D
|All times are GMT -5. The time now is 07:57 PM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright © 2005-2013 UnitedBimmer.com