You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
Lighting
Sponsored by: BavToys.com Discussion of headlights, fog lights, blinkers, and any other car lighting.
User not setup in Rate My Car. Click here to set it up.
Your Ride: 1998 m3 coupe :-D
another lighting problem for me...
hey again....so i took the zkws out of the 328 and swapped them over the the m3. i can adjust the driverside headlight w/ the screws so that is fine. but the passenger side is a completely different story. the screw in the back is bairly hanging on by the threads. which ever way i screw it, in or out, it pops back and shoots the light angle way upwards. hwo do i fix this problem???? the up and down adjuster screw wont push in and rethread unless i push really hard; and still wont adjust the light down, it just pops out again . any help would be nice. cya guys
User not setup in Rate My Car. Click here to set it up.
Your Ride: 1998 m3 coupe :-D
from the back of the headlight? because that doenst work, it wont go thread in at all. it just threads enough to catch and hold there. it doesnt go in.
06-06-2006, 02:51 PM
. any help would be nice. cya guys 
Similar Threads
