ANGEL EYES ccfl ring REPLACEMENT

[habbie]

to replace your inner ccfl ring you will need to first open your euro ellipsoids to gain access to the ring assemblies:


^^ ^^
start by removing the 4 metal clips, 2 on top and 2 ot the bottom.



there are 4 tabs, 2 on each side, be carful they tend to break rather easily.



separate the glass lens from the main housing, there are wires on the inside and your slack may be limited so open the gently to not tear any wire.



remove the ring assembly from the projector or glass inner lens(depends on model), you can try to pry the front cover off without removing the complete ring housing.



take the chrome finished backing off to gain acess to the ccfl ring.



replace the ring and snap the plastic assembly shot. reassemble the headlight and enjoy.