m50 mani + software... - United Bimmer Community

**BaLAnCe17** · 10-24-2006, 12:45 AM

Hey guys...there should be a few people on here that have done this to their OBDII's and i was looking for some feedback. im trying to find a m50 manifold for cheap and talk to either someone at JC/Eurosport/Turner or AA as far as software goes. i already have an intake and exhaust so it should work out pretty well. any suggestions or comments would be helpful. thanks

**94bmw325i** · 10-24-2006, 01:03 PM

get it, will be one of the most noticable upgrades for the $ I have been hearing!

Especially if you get software also, some people don't.

drz · 10-24-2006, 01:58 PM

Check out the classifieds on bf.c. There's a member there that puts together kits for cheap. I will look through my inbox; I may still have the e-mail address.

**BaLAnCe17** · 10-24-2006, 02:02 PM

sweet man. thanks. does anyone know of retailers that sell the kits?? websites???

**BaLAnCe17** · 10-25-2006, 02:40 PM

no one knows where i can find a fairly cheap m50 manifold?

**215BIMMER535** · 10-26-2006, 09:02 PM

KOperformance.com should be able to help you out last i knew they sold the conversion kits for 170 and you can get the conversion kit with a reman. manifold for 350 i plan to do the same thing very soon now

drz · 10-27-2006, 01:02 AM

+1 for koperformance

**B_w.** · 10-27-2006, 04:31 PM

call a junk yard or auto recycler. should be able to get one for $150.

as for software: do you plan on doing any other kind of mods like cams or fi? if so hold out on the software and just do the maniold for now.

**V-tecKILLAH** · 11-01-2006, 04:36 PM

I have a M50 intake manifold...

**BaLAnCe17** · 11-01-2006, 08:22 PM

would i need the software with the conversion? i could always just pick up the manifold from somewhere for way cheap...what have you guys heard?

**defkon99** · 11-01-2006, 08:48 PM

Does KO sell their kit with software? i think its just a bolt on and go isnt it ?

**B_w.** · 11-01-2006, 09:20 PM

there is no special software for the manifold. wait till you get cams or something. i would not buy anything from ko. they are just a reseller for aa. i would get the eurosport kit or just do it yourself. if you can just get the eurosport install cd you could follow that along and source the parts yourself. i think you could do it np.

DEATH2000 · 11-01-2006, 09:27 PM

If you buy an M50 manifold get the install kit which has all the parts and other stuff you need to make the install go smoothly. Im planning to get an M50 this spring and maybe some other stuff.

**BaLAnCe17** · 11-02-2006, 04:40 PM

does anything from the m52 mani swap to the m50, or would i have to get all the extra parts...

drz · 11-02-2006, 11:15 PM

The stuff that doesn't swap is all the stuff that comes with the aforementioned kits.