OBC trying to be funny P
 

hey guys,

i had to disconnect my battery a couple of days ago and when i connected it back the OBC just shows sumthng like PPPP, i checked the manual and also checked for threads about that but couldnt find anything, so at last my question is,

how can i make that work again???

thanks :drive2

I hoipe you figired it out by now, but you set the time...

I have the same problem

Did you fixed it ?

as "eagle" stated - just reset the clock/time & date

OK ! But my OBC is type 4
and it doesn't have the reset hole :(

How can I reset it ?

set the clock and time again...
using the 1000 100 10 & 1 keys

not "reset"

OK!

Thank you !

I will try on.

When I pressed the keys , my OBC didn't react . :dunno

I can't enter value , it shows only PPPP

try pressing time date first... I don't remember since i pretty much just do it and don't think about it.

I held down clock and set and that gets the clock able to be set again.

again ....... no action :bluecry1

then it must be dead... or you can try resetting it by removing the positive battery terminal again, and give it one more shot.

I fitted a new coding plug and now the OBC works good.

thank yuo guys for suggestions