03-17-2006, 11:07 PM
|
#1
|
Name: habbie
Title: Forum Sponsor
Status: Offline
Join Date: Dec 2005
Location: over there
Your Ride: Supercharged 97 M3/04 M3 vert/07 ESCALADE/04 Harley VRSC/
|
ANGEL EYES cold start fix by ROOZ
In the winter times when the temperature hits in the 30's sometimes your DDE will take a good while to get to the good temperature to get on. A fix for that is to hard wire the ballast in...
The ballast is located between the high beams and the low beams, it's a small black box...
GENTLY take it out
Then find the two connectors...
Cut the cables ONE AT A TIME!!!! then hard wire them, and you'r done 
special thanks to ROOZ for this great write up |
|
|
|