E23 L7 Dashboard Removal
I'm somewhat stumped on this one... I've removed the center console, stereo, lower paneling, glovebox, and 4 nuts from the underside of the dash. Yet it still won't come up. I've got the A-pillar covers off, the front of the dash moves, but the rear is stuck. I'm wondering if there are other nuts I have to remove to get the blasted thing off (replacing heater core)
Lastly, there's a 4 wire plug w/ 1 wire snipped and tapped into a same colored wire on the main harness for the climate control(larger wiring harness) - it's purple/white I believe (4 wire plug - red, space, brown/white, brown, purple/white.) http://files.unitedbimmer.com/ub.c/Q...e/Harness1.JPG Wondering if anyone knows what that's for? I don't see anything for the plug to go to, so I'm not sure why it's been cut and tapped into the other line. Thanks!
Alright... I found the last 2 bolts to be freed in order to get the dash up(a drawing of them anyhow), and have pulled the cluster... anyone know where exactly the last 2 nuts are(shows approximately halfway back on the very ends of the dash... don't see them though)? This is getting EXTREMELY annoying that I can't find them (perhaps I have to remove everything from under the dash to get to them? Damn I hope not.) Any help would be GREATLY appreciated... I want to get this done so I can go on the drive tomorrow, but am fearing it won't happen =o(
Also, still have the question mentioned above(with pic)
|All times are GMT -5. The time now is 11:52 AM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.
Copyright © 2005-2013 UnitedBimmer.com
Ad Management by RedTyger