Hey Guys , so ive been searching like crazy on various different Bmw forums
!! and hoped that you boys can enlighten me with sum knowledge .....
so the thread starts like this :
Parts i have currently
M52 single vanos motor complete
M50 non vanos head complete
M50 non vanos pistons
To eliminate the vanos so i can run full AFM on the engine. (dnt wana tune the vanos or have to service it )
so ive found out that a M50 NV head will work on a M52 Single vanos bottom end, BUT
..... what i have gathered is the the M50 NV cams are more aggressive than the M52 cams , hence it will cause "Valve interference" and the compression will be too high !!!
so i wanted to know if i can use the M50 NV head and piston on the M52 block
Put the M50 NV intake cam/trays/lifters/springs in with the M52 exhaust cam ( It performs better than the M50 NV exhaust cam )
into the M52 block using M50 NV pistons to get compression correct
Please feel free to scrutinize any of the info if its incorrect !!!!