While trying to adjust my parking brake shoes, I losened the shoe retainer pin (the one that goes through a spring, through the brake shoe, and grabs on to the outside of the brake dust shield) by mistake. I did this on both sides.
Once I figured out what I had done, I removed the brake rotors and put the retainer pin/spring back into place. I did not losen or remove the brake fluid hose, nor did I push in the caliper piston. I simply pulled the caliper out, and then pushed it back into place when I was done.
I have not dirven the car yet, since I am not sure that doing so will be safe. I trust the work I did, and conventional thinking tells me that everything should be fine. I have read in many places that bleeding the brakes is not necessary unless I have losened or removed the barke fluid hose. Pelican Parts' DIY for adjusting the parking brake shoes even suggests pushing in the piston a little (whihc I didn't even do), yet says nothing about bleeding the brakes.
Am I safe? Discuss. Thanks all.